well heres the for this winter
1.remove engine and fix timing and clean it up a bit more
2.while engines out remove power steering,relocate battery,ECUand fuse box
3.shave everthing i dont need in the engine bay and clean it up sand and paint
4. make custom steering loop and breather so steering works as a manual steering rack and does not get water and dirt in there
5.once engine is reinstalled tuck wires and hope it runs again
6.some fiberglass work
7.remove airbags
8.install new steering wheel and quick release
9.relocate washer tank and coolent resvoir

well so far i got the engine hauled out the fuse box hauled out .ecu hauled out.The dash hauled out ,power steering removed and made the custom loop hose and breather, now just to find a spot to locate the fuse box around the dash and then lengthen every single wire that goes to it.then locate the ecu under the dash and lengthen every wire for that.
pictures are not in oreder this time next time they will be












marking every wire we had to cut so we would not make a mistake putting back togather








loop and breather just have the get a longer hose to go to the breather


well got a lil more done not much








well heres the progress so far, will start sanding the engine bay and welding up bolt holes and shaving everthing.

good luck man.
id love to be able to do this!

good start, cant wait to see it done

haha thanks ill keep the updates coming hope to have the fuze box done tommororo and have the engine bay mostly shaved

well messed around with it a lil bit tonoght did some more wiring , removed the old remote start and all the wires for it ,removed master cylinders (clutch and breaks)starting sanding engine bay and made template for fire wall







i will be sanding and painting the master cylinders
well got of my a$$ and did some more work painted the master cylider and cluth cylinder , removed old remote start unit removed cruise control unit , sanding ,sanding and more sanding







well thats all for today well be wiring up the fuse box in the next couple of days ,cleaning sanding and painting the tranmission (what color do you guys think i should paint it silver or black im leaning towards sivler as every thing else is black
aslo need to do more sanding and start shaving to engine bay
did some more tonight with my cluster will be converting it to leds not sure what color yet

stock color




what color should i paint that

looks good,

i wish i had the will and know how to do this. lol
good work bud.

Ya man A++ for doing it yourself!

removed heater core,ac unit, blower motor.






using a electric marine heater for defrost
well got the tranny off the engine , got the engine on the engine stand found my timing problem,will be fixing that soon ,replacing plugs wires ect. tranny ,motor mounts,brackets ,valve cover are getting sandblasted tommorro then painting pics later tonight of progress after finding some rust on the underneath of car will have to be jacked up interior gutted and do some welding then will be painting rock guarding the underneathe of it

dang...that's one hella build Coad.

deffinitly gonna be nice when its all done

sandblasting went well got everthing done i wanted to do rest will be sanded by hand,tranmission cleaned up nicely just have to sand prime and paint it now..







next time i sandblast im wearing a painters suit lol

awesome job man .... that dont even look like your garage lol it looks like you can move around lol

did that at the boat shop